|
Additional info:
Milling Spindle Diameter: 180 mm (7.09 in)
Boring Spindle Diameter: 130 mm (5.12 in)
Sliding Sleeve Diameter: 340 mm (13.39 in)
Milling Spindle Nose Diameter: 225 mm (8.86 in)
Taper Socket of Spindle Nose: Morse No.6 (ISO No.50)
Boring Spindle Travel: 900 mm (35.43 in)
Sliding Sleeve Travel: 350 mm (13.78 in)
Total Travel of Sliding Sleeve: 900 mm (35.43 in) & Boring Spindle
Number of Spindle Speeds: 24 (steps)
Spindle Speed: 4 ~ 800 rpm
Number of Feed Rate: 16 (steps)
Feed Rate: 0.045 ~ 8 mm/rev (0.0018 ~ 0.315 in/rev)
Rapid Traverse: 2500 mm (98.43 in)
- Still installed and under power
|
|
|
|
- Very Good Working Condition
|
|
|
|
- Available for immediate inspection and delivery
|
|
|
|
|