|
Additional info:
Spindle Hole 6.669" (190mm)
Spindle Speeds 10-1500 RPM
Spindle Horse Power 60/75 HP
Carriage (Z-Axis)
Longitudinal Travel, UT 80.31" (2,040mm)
Cutting Feedrates .0001-39.37 IPR (.01-1000mm/rev)
Rapid Traverse Speed, UT 393.7 IPM (10,000mm/min)
Longitudinal Travel, LT N/A
Cutting Feedrates, LT .0001-39.37 IPR (.01-1000mm/rev)
Rapid Traverse Speed, LT 393.7 IPR (10,000mm/rev)
Cross-Slide Travel (X-Axis)
Longitudinal Travel, UT 12.99+5.51" (330+140mm
Cutting Feedrates, UT .0001-39.37 IPR (.01-1000mm/rev)
Rapid Traverse Speed, UT 196.85 IPM (5,000mm/min)
Longitudinal Travel, LT 10.04+.59" (255+15mm)
Cutting Feedrates, LT .0001-39.37 IPR (.01-1000mm/rev)
Rapid Traverse Speed, LT 196.85 IPM (5,000mm/min)
Turret
No. of Tool Stations, UT 12
No. of Tool Stations, LT 8
Bed
Length of Upper Slideway 86.22" (2,190mm)
Width of Upper Slideway 28.35" (720mm)
Length of Lower Slideway 86.22" (2,190mm)
Width of Lower Slideway 22.05" (560mm)
Hydraulic Tank Capacity 10.6 Gal (40 R)
- Still installed and under power
|
|
|
|
- Very Good working condition
|
|
|
|
|