New Machinery


Forging Industry Association logo

Save

Save

Home > Machines > Used Machine Tools > Machining Centers, Vertical
Share:

Kitamura MyTrunnion 5-Axis w/Fanuc 16i-MB Controls &
50 Pos ATC, 20,000 spdl rpm, 24" 4-jaw chuck, 2006, Re:25879

25879

We have three (3) of these available. They are in very good working condition and are currently running production at a NorthEast USA plant site.

All are built new approximately 2006. Photos of all three are shown in the above photos.

Re: #'s are 25879, 25880 and 25894.

Machining Centers, Vertical
Specifications
Tbl L
24.8 "
630 mm
 
Tbl W
19.7 "
500 mm
 
Type
CNC 5-Axis Mach Ctr
CNC 5-Axis Mach Ctr
 
Builder
Kitamura
Kitamura
 
Model
MyTrunnion
MyTrunnion
 
Control
FANUC 16i-MB
FANUC 16i-MB
 
Age
2006
2006
 
Ref #
25879
25879
 
Spindle taper
40
40
 
Spindle speed range
20 ~ 20,000 rpm
20 ~ 20,000 rpm
 
Spindle motor power
20 hp
15 kW
 
ATC quantity each
50
50
 
Max longitudinal cutting feed (X-Axis)
1,968 "/min
49,987 mm/min
 
Max transversal cutting feed (Y-Axis)
1,968 "/min
49,987 mm/min
 
Max vertical ram cutting feed (Z-Axis)
984 "/min
24,994 mm/min
 
X-Axis travel
32.3 "
820 mm
 
Y-Axis travel
29.3 "
744 mm
 
Z-Axis travel (Ram Stroke)
19.6 "
498 mm
 
Net weight of machine
38,000 lbs
17,237 kgs
 
      Convert to Inches Convert to Metric
Note

Additional information:

Some additional specifications are as follows:

A Axis: 150° ( Table Tilt )
C Axis: 360° ( Table Rotate )

Max Weight on Table: 880 lbs
T-Slot : 0.7″ X 3 Slots
Table to Spindle Nose: 3.9″ – 23.6″

Rapid A : 2000 Degree Per Minute
Rapid C : 6000 Degree Per Minute
Cutting Feedrate: 984 Inch Per Minute

Max Tool Size: 5.91″ X 11.8″
Max Tool Weight: 22 lbs.
Tool Change Time: 1.7 Second

Complete with:

Simultaneous 5 Axis Cutting
20,000 RPM High Precision Spindle
Coolant through Spindle
50 position ATC
Glass Scales on the Axis
PCMCIA Card Slot
128 MB Memory
Spindle Chiller
Spindle Orientation
Helical Interpolation
Rigid Tapping
Absolute Incremental Programming
Fast Rapid Traverse Rate
Flood coolant with large separate coolant tank
Chip Conveyor
Work light

  • Very good working condition
 
  • Still installed and under power for inspection