New Machinery


Save

Save

Share:

4,000mm Dia x 1,000mm Height HBE PRESS
Radial Axial Ring Rolling Mill new 2016, Re:25733

25733

Built new in 2016, this Ring Rolling Mill is installed in a North American Plant Site. After installing the Mill, the Manufacturing Program for the company changed so this Mill was only ever run light and intermittently and is, therefore, in "Like New" condition. It may be inspected on request and is available for immediate delivery.

Ring Rolling Mills
Specifications
Dia
157.5 "
4,000 mm
 
Height
39.4 "
1,000 mm
 
Builder
HBE PRESS
HBE PRESS
 
Type
Radial Axial (New 2016)
Radial Axial (New 2016)
 
Radial
275.6 tons
250 tonnes
 
Axial
220.5 tons
200 tonnes
 
Min dia
15.7 "
400 mm
 
Ref: #
25733
25733
 
Min Ring Height
3.9 "
100 mm
 
Main Roll Dia
32.3 "
820 mm
 
Main Roll Height
43.1 "
1,095 mm
 
Axial Rolls Angle of Cone
35º
35º
 
Number of Main Roll Motors, current type & Power of each
(1) @ 630kW DC (845hp)
(1) @ 630kW DC (845hp)
 
Number of Axial Roll Motors, current type & Power of each
(2) @ 400kW DC each (536hp ea)
(2) @ 400kW DC each (536hp ea)
 
Total Electrical Power
1,918 hp
1,430 kW
 
Operating Pressure
4,786 psi
330 Bar
 
Machine Length
707.7 "
17,975 mm
 
Machine Width
165 "
4,190 mm
 
Machine Height above floor
215.4 "
5,470 mm
 
      Convert to Inches Convert to Metric
Note:

Additional info:
Max Ring Weight: 10,000 kgs (22,000 lbs)
Rolling speed: 0.33 - 1.50 mtrs/sec
Mandrel Roll dims: 2,245mm length x 170mm diameter
Mandrel horiz sliding: 800mm
Axial Roll horiz sliding: 4,010mm
Upper Axial Roll vertical sliding: 1,020mm
 
Hydraulic System:
Max Pressure: 330 Bar
Main Pumps: Oilgear Fixed Displacement Axial Piston Pumps
Pilot Pump: Oilgear Variable Displacement Axial Piston Pumps
Cooling & Filtering Pump: Vane Pump
Manifold Blocks and components: Parker
Servo Valves and Controller: MOOG
Main Tank: 5,000 liters
System Filter & Servo Filter: Hydac
Hydraulic Fluid: AW46
 
Electrical Control System:
PLC: Siemens S7
HMI: (4) Dell 24” Touch Screens (P2418HT (210-ALCS)
Modes: Fully Automatic
Measuring System: Laser (glycol cooled)
 
Control Panels:
PLC Panel: 30 Amp Feed
DC Drive Panel: (2) x 1600 Amp, 600 Volt Feeds
Main Control Panel Laser Panel: 1200 Amp, 600 Volt Feed
Laser Panel: 20 Amp, 600 Volt Feed
 
Cooling Water Required:
Temperature: 30º - 32º C
Pressure:  5-6 bar
Flow Rate: 1000 litres / minute
P.H.: 7.5 - 8.2

Compressed Air Requirements:
Pressure:  5-7 bar
Temperature: 20º - 25º C 
Flow Rate: 800 litres / min
 
NOTES:
Equipment to supply compressed air is not included.
Equipment to cool and pump cooling water is not included.
Equipment to cool laser is included.

  • Available for immediate inspection and delivery
 
  • Still installed and under power for inspection
 
  • Exceptionally fine condition