Save
Originally designed and built by Wagner, this Lathe has been completely Retrofitted and Fully Rebuilt by KARATS in 2009 / 2012 and is in Excellent condition. It is available for immediate inspection and delivery. In 2012 a KARATS Headstock & Tailstock were both installed brand new.
Additional info:
Swing over the saddle : 3,060 mmChuck dia : 2500 mmChuck clamping dia : 300~1700 mmMain motor rotating speed : 0.5~130 rpm (2 step)Z axis Feeding : 16,550 mm Feeding speed : 0.1~30 mm/min Rapid feeding speed : 2,000 mm/minX axis Feeding : 1,100 mm Feeding speed : 0.05~15 mm/min Raid feeding speed : 2,000 mm/minTailstock Feeding : 2,000 mmTotal length of Bed : 23,400 mm (76.7 feet)NC Control : FANUC 21i-TBMotor power as follows: Main motor : AC 330 Kw Tailstock feeding : AC 5.5 Kw Z-axis feeding : AC 16 Kw X-axis feeding : AC 6 KwMachine layout –Refer to drawingFour Steady Rests:3 points hold 960mm~300 mm dia 30 tons load 4 setsHistory of Retrofit2009 All parts modernized2012 Head stock & Tailstock changed to new Headstock & Tailstock