New Machinery


Save

Save

Share:

Nickel Based Alloy Morgardshammer 16" 3-Stand 3-Hi
Cross Country Bar Rolling Mill w/Roller Bearings Re:25556

25556

This 3-Hi 3-Stand Mill will accept up to 2-1/4" Billets and has rolled product down to 0.400" square & round bars. The sizes and number of passes utilized for various typical products rolled are listed below.

The Mill is in Excellent Working Condition having been very well maintained since being installed new.

It runs (3) Stands in Cross Country configuration and has (3) extra stands, one for each position.

 It will accept billets up to in the range of 2-1/4" (57.1mm) in diameter and finish down to in the range of 0.400" (10.1mm).

 Some roll drawings for this 16" Mill show up to 24 product grooves in the rolls.

 Roll dimensions are as follows:

165" diameter x 28" face

The Mill is driven by a 790kW (1,059hp) ASEA DC drive system with a large Gearbox (see photos).

It is equipped with Spherical Roller Bearings.

Materials processed on this Mill are as follows:

U-718, U-901, D-979, A-286, Ni-80, Ni-90, Waspaloy, M-252, X-750, U-625 & UDHX

Still installed this Mill is available for
immediate inspection & delivery at NorthEast USA Plant Site!

Included are three extra Stands and a complement of Spare Parts.

Cross Country Mills
Specifications
Tpy
50,000 tons
45,359.2 tonnes
 
Billet
2.4"
2.4"
 
Products
Nickel Based Alloy Bar/RCS
Nickel Based Alloy Bar/RCS
 
Stands
Three
Three
 
Builder
Morgardshammer
Morgardshammer
 
Type
3-Hi / 3-Stand
3-Hi / 3-Stand
 
Ref #
25556
25556
 
      Convert to Inches Convert to Metric
Note