|
Additional Info:
Force per hammer: 1.600 kN (160 MT)
Number of strokes per minute: approx 620
Length of the hammer: 270 mm (10.63")
Hammer adjustment: max. 80 mm (3.15")
Max. starting size: round 130mm (5.12") or square 115mm (4.53")
Min. finish size: round 26 mm (1.02") or square 24 mm (.94")
Max. thickness/width ratio: 1 : 5.5
Max. product width: 110 mm (4.33")
Max. piece length: 4.000 mm (13' 1.5")
Max. diam. in the Manipulator: 130 mm (5.12")
Manipulator torque force: 3 kN (674 lb. force)
Spindle ID: 100 mm (3.94")
Max. reduction in one pass: 25 mm (.984")
Water consumption: 25m3/hour at 30°C (6,604 gal/hour at 86°F)
15 m3/hour at 20°C (3,963 gal/hour at 68°F)
Compressed air pressure: 4.5 bar (65 psi)
Bar Loader: max. load capacity: 300 kg (661 lbs)
max. work piece length: 2.100 mm (82.68")
min. work piece length: 500 mm (19.69")
Bar Unloader: max. load capacity: 300 kg (661 lbs)
max. work piece length: 4.000 mm (13' 1.5")
min. work piece length: 500 mm (19.69")
Manipulator high travel speed: 500 mm/sec. (98.4 fpm)
Manipulator feeding speed:
15 - 200 mm/sec. (2.95 - 39.4 fpm) infinitely variable
Power supply: 380 V / 50 Hz
Total installed power: 280 kW / 540 A
Operating voltage: 380 V / 50 Hz
Control voltage: 220 V / 50 Hz
Lights voltage: 220 V / 50 Hz
The line is complete with:
- Forging Machine SX-13
- 2 (two) Manipulators with Beds
- Loading / Unloading Devices
- Electrics with Controls and Pulpits
- Hydraulics and Pneumatics
- Available spares and tooling
- Available documentation
Current Production Program:
Rounds 26 - 100 mm (1.02" - 3.94")
Square 24 - 80 mm (.94" - 3.15")
Flat: max 110 mm (4.44") wide x min. 12 mm thick
Hex: 55 - 95 mm (2.17" - 3.74") AF
|