New Machinery


Save

Save

Share:

ALD Electron Beam Cold Hearth Refining type Melting
Furnace w/(6) 600kW Electron Beam Guns Re:25918

25918
ALD Electron Beam Cold Hearth Refining type Melting | Furnace w/(6) 600kW Electron Beam Guns Re:25918

This Electron Beam Melting Furnace is equipped with six (6) Electron Beam Melting Guns each rated at 600 kW. It was designed to produce Titanium Alloy Slabs up to 14.6 tons and Ingots up to 13.2 tons utilizing scrap, sponge and alloying elements. It is immediately available.

Comprehensive information will be sent to seriously interested parties on request.

Industrial Furnaces
Specifications
Type
Electron Beam Melting
Electron Beam Melting
 
Fuel
Hi-Voltage Power
Hi-Voltage Power
 
Manufacturer
ALD
ALD
 
Intr L
248 "
6,300 mm
 
Intr W
165.4 "
4,200 mm
 
Ref: #
25918
25918
 
      Convert to Inches Convert to Metric
Note

Some additional information:

Feeding Material:
Titanium Sponge – max 100 mm
Bulgy Feedstock – max 100 x 100 x 100 mm
Coppels and Chips (broken turnings) length – max 100 mm
Wire rods <ø50 mm x 100 mm
Solids in one piece to be side fed:
Cross section – max 450 x 450 mm
- Length – max 1,600 mm
- Min - 400 mm
- Weight per piece – max 1,200 kg
Material grades: 1, 1S (Oxygen below 0.06%), 2, 3, 5, 12

Melting power is 3,600 kW (6 x 600 kW)
Vacuum, mbar [Pa] – 10-4 [0.1]
Pumping capacity liters/sec – 200,000
Charging: Scrap, Ti sponge, alloying elements
Nominal Capacity tons per year: 5500 tons if 100% CP and 3300 tons if 100% Alloy
Ingot Chambers: two (2)
Min % Scrap: CP: 0% / alloy: approx. 60-70% required

The Furnace is designed with a cold hearth which can be either fed by bar-sized feedstock from the horizontal feeder or by aggomerates fed from an agglomerate feeding system which serves as well as a material buffer to back up material flow.

Comprehensive information will be sent to seriously interested parties on request.