New in 2011, this Pipe End Facing & Beveling Machine has only been run in production light and intermittently and is in Excellent Working Condition!
Pipe diameter range is 406 to 1,650 mm (16" to 65") and Pipe Wall Thickness range is from 7 to 60 mm (0.275" to 2.362").
Pipe length range is 4 to 12.5 meters (13.1 to 41 ft)
Pipe is picked up and positioned on both sides with internal clamps. The beveling is done with heavy plate milling heads with several cutting plates on both sides. Four (4) 250 mm diameter Heavy Plate Milling Heads perform the Beveling Operation. The four Cutter motors are rated at 15 kW (20 hp) each.
Note: This is a large machine weighing 160,000 kgs (352,000 lbs).
Suppling Electrics: 440 volts / 50Hz.
Note: New PLC and HMI were were added in 2015 and the machine has not run since that time. Condition is Excellent!