Currently in Production, this Ring Rolling Mill will be removed from service and then available for shipment beginning in April 2020. It is in Excellent working condition.
In 2018 over $200,000. USD was invested in this machine for upgrades and to install a "Top of the Line" sophisticated Software package designed, built and installed by Siempelkamp which brought the "Controls Technology" of this machine up to the very highest standards available today.
Radial Rolling Pressure parameters:Radial rolling pressure for mandrels I and II: 4 to 40 tonnesRadial rolling pressure for mandrel III: 4 to 16 tonnes Axial Rolling Pressure parameters:Axial rolling pressure for characteristic circles K 1 and K 2: 2 to 25 tonnesAxial rolling pressure for characteristic circles K 3: 2 to 20 tonnesAxial rolling pressure for characteristic circles K 4: 2 to 16 tonnes Outside diameter of Mandrels:Diameter of mandrel I: 120mm (4.72")Diameter of mandrel II: 95mm (3.74")Diameter of mandrel III: 70mm (2.76") Inside diameter of Mandrels:Diameter of mandrel I: 130mm (5.12")Diameter of mandrel II: 100mm (3.94")Diameter of mandrel III: 75mm (2.95") Max outside diameter of Blank: 475mm (18.70")Max area of Ring Face: 264 sq. inchesMax Axial width of ring: 225mm (8.86")Min Axial width of Ring: 40mm (1.57")Approx Max outside diameter of ring: 1,120mm (44.1")Approx Min outside diameter of ring: 230mm (9.06")Approx Min outside diameter of ring w/Mandrel II & for a Min final wall thickness: 9.9mm (0.39") Travel of Mandrel Carriage: 560mm (22.05")Nominal rolling speed: 1.3 mtrs/sec (49.21 in/sec) Nominal powers required:For Radial drive: 80kW (107hp)For Axial drive: 32kW (43hp)
TrueForge Global Machinery Corp. • 100 Merrick Rd - Suite 208E, Rockville Centre, New York 11570 USA516-825-7040 - Phone • 516-825-7115 - Fax • eMail: email@example.com • Web: www.trueforge.com