Save
In 2018 over $200,000. USD was invested in this machine for upgrades and to install a "Top of the Line" sophisticated Software package designed, built and installed by Siempelkamp which brought the "Controls Technology" of this machine up to the very highest standards available today.
We dismantled this machine in July of 2020 and placed it into storage. It is available for immediate inspection at a Michigan USA location on request.
Additional info:
Radial Rolling Pressure parameters:Radial rolling pressure for mandrels I and II: 4 to 40 tonnesRadial rolling pressure for mandrel III: 4 to 16 tonnes Axial Rolling Pressure parameters:Axial rolling pressure for characteristic circles K 1 and K 2: 2 to 25 tonnesAxial rolling pressure for characteristic circles K 3: 2 to 20 tonnesAxial rolling pressure for characteristic circles K 4: 2 to 16 tonnes Outside diameter of Mandrels:Diameter of mandrel I: 120mm (4.72")Diameter of mandrel II: 95mm (3.74")Diameter of mandrel III: 70mm (2.76") Inside diameter of Mandrels:Diameter of mandrel I: 130mm (5.12")Diameter of mandrel II: 100mm (3.94")Diameter of mandrel III: 75mm (2.95") Max outside diameter of Blank: 475mm (18.70")Max area of Ring Face: 264 sq. inchesMax Axial width of ring: 225mm (8.86")Min Axial width of Ring: 40mm (1.57")Approx Max outside diameter of ring: 1,120mm (44.1")Approx Min outside diameter of ring: 230mm (9.06")Approx Min outside diameter of ring w/Mandrel II & for a Min final wall thickness: 9.9mm (0.39") Travel of Mandrel Carriage: 560mm (22.05")Nominal rolling speed: 1.3 mtrs/sec (49.21 in/sec) Nominal powers required:For Radial drive: 80kW (107hp)For Axial drive: 32kW (43hp)