New Machinery


Save

Save

Share:

300,000 Tpy West European Hi-Capacity Rod,
ReBar & Wire Coil Rolling Mill Re:25150

25150

Built new around 1980, this Mill was revamped in 2016 and is in very good working condition. It is still installed and is available for inspection on request and immediate delivery after purchase.

Brief Pertinent details are as follows:

Starting billet: 140 x 140 x 8000 mm

Hourly Production: 65 t/h

Production capability ranges:

• Rebar 8 to 32 mm

• Plain Rounds: 12 to 32 mm

• Coils: 8 to 20 mm

Bar / ReBar Mills
Specifications
Max dia
1.3 "
32 mm
 
Min dia
.3 "
8 mm
 
Tons per Year
330,693.4 tons
300,000 tonnes
 
Mill Type
ReBar / Plain Rounds / Coils
ReBar / Plain Rounds / Coils
 
Max Sqr Billet
5.5 "
140 mm
 
Builder
West European
West European
 
Age/Upgrade
1980
1980
 
Ref #
25150
25150
 
Upgrade years
2016
2016
 
Max smooth bar diameter
1.3 "
32 mm
 
Min smooth bar diameter
.3 "
8 mm
 
Max ReBar diameter
1.3 "
32 mm
 
Min ReBar diameter
.3 "
8 mm
 
Max Billet length
315 "
8,000 mm
 
Cooling Bed length
177 feet
54 meters
 
Cooling Bed width
23 feet
7 meters
 
      Convert to Inches Convert to Metric
Note

Mill Component List is as follows:

*    Reheating  Furnace:

-     Pusher  type

-    Fuel:    CH4

-     Radiant  roof

-     Number  of  radiant  burners:       54

-     Front  side  burners:                    4

-    Recuperator

*     Furnace  Charging / Discharging  equipment

-    Hydraulic  pushing  machine  (2)  x  60  t  each

-    Hydraulically  operating  peel  bar,  12  m  strocke

-    (2) Billet  sensors  for  automatic  furnace  operating  (no  person  required)

-    Extraction  Pinch  Roll

-    Run  out  Roller  Table

*     H/V  Roughing  Mill  comprised  of:

-     (3) Horizontal  stands  dia.  520  x  250  mm  Barrel  length

-     (3) Vertical  stands  dia.  520  x  250  mm  Barrel  length

-     First  and  second  stand  individually  driven  by  DC motor  530  kW / 660  rpm

-     Stands  3 ÷ 6  driven  by  AC motor  1,500  HP  / 735  rpm

*     Connecting  Roller  Table  between  Roughing  Mill  and  Intermediate  Mill

*     Head  /  Tail  flying  Shear

*     Intermediate/Finishing  Mill  comprised  of:

-     (6)  Roller  Stands  G3  Red  Ring  type  dia  360  x  700  mm  BarrelLength

-     Vertical  Loop  Formers

*     (2)  Head  /  Tail  Flying  Shears 

*     Finishing  Mill  composed  of:

-     (6) Roller  Stands  Pomini  G2  Red  Ring  type  dia  320  x  600  mm  BarrelLength

-     Vertical  Loop  Formers

*     (2) Head  /  Tail  Flying  Shears 

*     Finishing  Mill  (Block  type),  composed  of:

-     (2) Horizontal  loop  formers

-     (2) Independent  strands  with  4  stands  HV   block

-     (2) conveyor  funnels  to  connect  cooling  bed  or  coil  forming  lines

*     Finishing  line  for  dia  18÷32  Single  strand  production

-     Optimization  Flying  Shear  with  deviator

-     Quenching  device

-     (1) Pinch  roll

-     Cut  to  length  Flying  Shear  (Crank  &  Flying  conformation)

*     Finishing  line  for  dia  8 ÷ 16  mm

-     Double  strand  Quenching  Device

-     (2+2)  Pinch  Rolls 

-     (2)  Flying  Shears

-     (1) Chopping  Shear

-     (4) Bar  Breakers

-     Double (2+2  Strands)  Twin  Channel 

*     Cooling  Bed  54  x  7  mtrs,  80  mm  pitch

*    Run  out  Roller  table

*    Movable  Stop

*    Cold  Shear  250  t,  blades  width  750  mm

*    Layers  transfer  chains  type 

*    (2) Automatic  Tying  Machines  Hydraulically  operated

*    Tied  bundles  evacuation  system

*    Weighing  scale

*    Electric/electronic  devices  for  the  full  Rolling  Mill 


Coils Production Section includes the following:

*     Line  #  1  (  partially  dismantled)  includes:

-     (4) Garret  coilers   500  –  800  kg  coil  capacity

-     (2) Flying  Shears  (deviator  equipped)

-     Coil  transfer  total  length  19  mtrs  x  1400  mm  width

-     Coil  pusher  to  collecting  cradle
 
*      Line  #  2  presently  installed,  comprised  of the following:
-     (2) Flying  Shears Start  Stop  type
-     (2) Pinch  Rolls 
-     (2) Cooling  lines  –  water  operating-  18  m  length
-     (2) loop  forming  Heads  Edenborn  type,  complete  with  pinch  Rolls
-     (2) Cooling  roller  ways,  including  ccoling  fans
-     (2) Coils  transport  lines,  Hook  type
-     Coils  press/tying  machines  for  single  Coil,  Run  in-out  Devices,  Hydraulic  units
-     Coils  press/tying  machines  for  multiple  Coil,  Run  in-out  Devices,  Weighing scales,  Hydraulic  units
-     NOTE:  Complete  revamping  of  the  line,  including  safety  devices  have  been performed  on  2011.
  
*      Auxiliary  devices  including  Water  Plant,  Compressors, m  Pumps  Station  etc.  are  all available.
 

  • Still installed and under power
 
  • Very good working condition