New Machinery


Save

Save

Share:

2500Ton SMS 2-Column Push Down Open Die w/DDS
30t Rail Bound Nip & DDS 30t & 10t Ingot Chargers all new 1990's, Re:25962

25962

This Forging Line was new in the 1990's and has been very well maintained. It is in excellent condition and is available for immediate inspection and delivery. The Line includes the following:

1.) 2,500 ton push down type Oil Hydraulic Open Die Forging Press

2.) 30 ton Dango & Dienenthal Rail Bound Forging Manipulator

3.) 30 ton Dango & Dienenthal Mobile Ingot Charger

4.) 10 ton Dango & Dienenthal Mobile Ingot Charger

Hydraulic Open Die Forging Presses
Specifications
Force
2,755.8 tons
2,500 tonnes
 
Manufacturer
SMS Hasenclever
SMS Hasenclever
 
Hydraulics
Oil
Oil
 
Stroke
51.2 "
1,300 mm
 
Daylight
118.1 "
3,000 mm
 
Table L-R
84.3 "
2,140 mm
 
Table F-B
45.3 "
1,150 mm
 
Age
1990's
1990's
 
Ref: #
25962
25962
 
Press Action
Push Down
Push Down
 
Number of Columns
Two
Two
 
Number of Main Cylinders
One
One
 
Number of Pull-Back Cylinders
Two
Two
 
Rated Total Forging Tons
2,755.8 tons
2,500 tonnes
 
Forging Speed
4.3 "/sec
110 mm/sec
 
Ram Advancing Speed
9.8 "/sec
250 mm/sec
 
Ram Return Speed
9.8 "/sec
250 mm/sec
 
Press Height above floor
378 "
9,600 mm
 
Press Depth below floor
79.9 "
2,030 mm
 
Number of Hydraulic Pumps
Five
Five
 
Total Pressure Rating of Hydraulic System
6,527 psi
450 Bar
 
Main Cylinder diameter
33.5 "
850 mm
 
      Convert to Inches Convert to Metric
Note:

Additional information:

Press comes equipped with the following:

Shifting Table with 610 & 2,110 mm stroke and a Die Magazine with 2,260mm stroke

Die Shifting Stroke is 3,240mm

Forging tolerance is ±1mm

Press weight is 250 tonnes

Specs for the 30 ton Rail Bound Nip are as follows:

Built new 2001

Tongs opening for rounds Max 1,600mm

Tongs opening for square Max 1,347mm

Minimum tongs opening is 310mm

Rotation of tongs speed is 1/36 rpm approximately

Lowest position of the tongs is 1,150mm

Upward tilting is 6.5º  -  Downward tilting is 14º and tilting speed is 3º per second

Travelling speed Step #1 is 0 - 500 mm/s  -  Step #2 is 0 - 1,000 mm/s

Main pump motors: (2) @ 152kW each

Machine dimensions are 10,010 mm L x 4,040 mm W x 4,567 mm H

Also included in this Forging Line are the following:

30 ton Mobile Ingot Charger

10 ton Mobile Ingot Charger

  • Still installed and under power
 
  • Exceptionally Fine Condition