New Machinery


Save

Save

Share:

250,000 Tpy Ashlow Hi-Speed 23-Stand
5.5 to17mm diameter Wire Rod Mill Re:25945

25945

New in the early 1980's, this Wire Rod Mill has been frequently upgraded and is well maintained. The Coil Line was revamped in the year 2000, and the RHF loading devices in 2004 along with revamping of the Coil Compacting & Tying Machines. New Wire Rod Automation was added in 2005 and a new Billet Grinding Line was installed in 2006. New RHF Automation and Coil Reforming revamping was carried out in 2012.

Approximately $2,500,000. USD of all important Spare Parts are included in our offering.

It has a starting Billet size capacity of 150 x 150 x 12000mm. The Reheating Furnace is a Walking Beam type fueled by CH4 and is rated at 80 tons/hour.

Rolling Configuration consists of the following:

H/V type 7-Stand Roughing Mill

H/V type 6-Stand Intermediate Mill

10-Stand Finishing Block with 45º configuration running a max speed of 80 mtrs/sec powered by two 1,750 kW (2,346 hp) D.C. motor drives.

The Mill is available for immediate inspection and delivery.

Wire Rod Mills
Specifications
Mx Ø
.7 "
17 mm
 
Mn Ø
.2 "
6 mm
 
Tpy
275,577.8 tons
250,000 tonnes
 
Mill type
13-Stand Mill w/10-Stand Finishing Block
13-Stand Mill w/10-Stand Finishing Block
 
Mx Billet
5.9 "
150 mm
 
Builder
Ashlow
Ashlow
 
Age
1980's
1980's
 
Ref #
25945
25945
 
Upgrade years
2000; 2004; 2005; 2006; 2021
2000; 2004; 2005; 2006; 2021
 
Max Wire dia
.7 "
17 mm
 
Min Wire dia
.2 "
6 mm
 
Max Billet length
472.4 "
12,000 mm
 
Max Rolling speed
15,748 fpm
4,800 Mpm
 
Tons per hour ReHeat Furnace capacity
88.2 tons
80 tonnes
 
Type of ReHeat Furnace
Walking Beam
Walking Beam
 
ReHeat Furnace fuel
CH4
CH4
 
Number of Rolling Mill Stands
13 + 10-Stand Finishing Block
13 + 10-Stand Finishing Block
 
      Convert to Inches Convert to Metric
Note

Additional info:

Head/Tail flying shears: (2) ( one crank type / one flying type)

Loopers btwn intermediate Stands: 1-Strand type

Looper btwn intermediate mill & finish block: 1-Strand

Wire first cooling device: N° 3 Sections, 150 m3/h /12 bar

Feeding pinch roll: Horizontal

Loop forming head: Spiral pipe type

Cooling conveyor: Roller way partially submersible

Coil reforming device: Vertical w/quick shear for coil dividing

Coils secondary cooling: Cleveland hooks type

Coil compacting/tying machine: Horizontal, hydraulically

     Operated with (4) tying heads installed.

Tied coil transport hooks: Cleveland type

Coil weighing scale: Automatic charging\discharging

SPARES: Very important quantity for entire Rolling Mill

Workshop: Complete for all Rolling Mill Maintenance

  • Very Good Working condition
 
  • Still installed and under power for inspection