New Machinery


Save

Save

Share:

150,000 Tpy Mannesmann Meer Continuous Seamless
Pipe Mill - Produce up to 159mm dia Tube/Pipe, Re:25801

25801

This Continuous Seamless Tube & Pipe Production Mill has been well maintained and is in very good working condition. There are over 225 Rolling Stands that come with the Mill. The Mill is available for immediate inspection and delivery.

Smls Tube & Pipe Mills
Specifications
Dia
6.3 "
159 mm
 
W/T
1 "
25 mm
 
Mill type
Continuous 3-Roll Mandrel Mill
Continuous 3-Roll Mandrel Mill
 
Builder
Mannesmann Meer
Mannesmann Meer
 
Age
1978 - 2004
1978 - 2004
 
Tpy
165,346.7 tons
150,000 tonnes
 
Ref #
25801
25801
 
Max round billet diameter
6.7 "
170 mm
 
Max billet length
334.6 "
8,500 mm
 
Minimum product diameter
.8 "
21 mm
 
Max joint length
52 feet
16 meters
 
Minimum joint length
20 feet
6 meters
 
Minimum wall thickness
.1 "
2 mm
 
      Convert to Inches Convert to Metric
Note

Additional Information:

A general list of Line Components is as follows:

1.) Feeding device to the rotary heating furnace          Built:    1999/2000
2.) Device to cut the billets by circular saw                 Mfg:     MDM               Built:    1978/2000
3.) Billet feeding device to the heating furnace          Mfg:    SMS    Built:    1999/2000
4.) Billet weighing device                   Mfg:    SMS                Built:    1999/2000
5.) Walking beam furnace (Billet Pre-heating furnace)           Built:    2000
6.) Hot shear including transportation conveyors                  Mfc.:    Koch    Built:    1999/2000
7.) Billet weighing device                  Mfg:     SMS                Built:    1999/2000
8.) Rotary furnace                Mfg:                            Built:    2000                Natural gas heated    
9.) Transportation device between rotary furnace and pierce rolling mill    
10.) Pierce rolling mill including operator panels and motors      Mfg:  MDM  Built: 1978/2000
11.). Anti-oxiagent device          Mfg:    MDM               Built:    1999/2000
12.) Transportation manipulator of sleeve                  Built:    1999/2000
13.) Mill scale crushing device in front of the continuous rolling mill
14.) Continuous and reduction tube rolling mill – 8 stands incl. Individual operator panels
15.) Transportation device of the piercer                    Mfg:    MDM               Built:    1999/2000
16.) Piercer Induction heater                         Mfg:    ELOTHERM                Built:    1999/2000
17.) Piercer lubrication device                      Mfg:    MDM               Built:    1999/2000
18.) Pulling rolling mill          Mfg:    MDM               Built:    1979/2000
19.) Tube transportation device between continuous and reduction rolling mills    
20.) Hot saw to cut the tube ends                   Mfg:    locally              Built:    1999/2000
21.) Induction tube heating unit                     Mfg:    Locally             Built:    1999/2000
22.)  Descaling unit in front of the reducing rolling mill
23.) Reducing rolling mill with 28 stands                 Mfg:    MDM   Built:    1979/2000
24.)  Cooling unit of main drives of the piercing rolling mill

  • Available for immediate inspection and delivery
 
  • Still installed but removed from power