New Machinery


Save

Save

Share:

12,000 ton Loewy Water Hydraulic Extrusion Press
with Mandrel to produce Heavy Pipe - Re:25675

25675

Still installed, this Heavy Duty Extrusion Press has been well maintained and is in very good working condition. It has been producing heavy pipe up to 508mm diameter and up to 50mm wall thickness in lengths up to 9 meters.

It was mechanically rebuilt in 2011 and new Controls and new Operator's Pulpit were installed in 2014. After that, it was never used much and is in quite good condition.

It may be inspected at a Southern USA plant site on request. It is available for immediate delivery!

Extrusion Presses
Specifications
Tons
13,227.7 tons
12,000 tonnes
 
Type
Steel Tubular Sections & Pipe
Steel Tubular Sections & Pipe
 
Builder
Loewy
Loewy
 
Bllt Ø
26 "
660 mm
 
Mandrel
Yes
Yes
 
Ref #
25675
25675
 
Main Ram Stroke
160 "
4,064 mm
 
Min Billet Dia
14 "
356 mm
 
Press Length
126 feet
38 meters
 
      Convert to Inches Convert to Metric
Note

Additional info:

The Press is equipped with the following:


Press Rams:
The Main Ram is 1,745mm diameter. 
There are two 910mm Side Rams. 
There are two 485mm Pushback Rams.
Mandrel Rams:
There is one 444.5mm mandrel ram.
There are two 311mm mandrel return rams.
Container Rams:
There are two 482.6mm container main rams. 
There are two 152.4mm container extend rams.
Side cylinder Boring diameter for cylinder bushings:
Outside diameter: 1,450mm
Inside diameter: 915mm
Length: 5.6 meters
Weight: 29 tons
Side Ram dims:
Outside diameter: 910mm
Length: 5.3 meters
Weight: 18 tons

  • Very good working condition
 
  • Available for immediate inspection and delivery
 
  • Still installed and under power for inspection