New Machinery


Save

Save

Share:

10,000 ton SMS MEER 4-Column Pull Down Hyd Open
Die Press Line with 100 ton RB Nip Re:25705

25705

This is an extraordinary line only 12 years old. It is rated at 8,000 Forge tonnes and 10,000 Upset tonnes. It comes with a 100 ton Rail Bound Forging Manipulator specs of which are shown below. This is a rare and unusual opportunity! If you can use this line in your operation, please consider it!

Hydraulic Open Die Forging Presses
Specifications
Force
11,023.1 tons
10,000 tonnes
 
Manufacturer
SMS Meer
SMS Meer
 
Hydraulics
Oil
Oil
 
Stroke
131.9 "
3,350 mm
 
Daylight
255.9 "
6,500 mm
 
Table L-R
167.3 "
4,250 mm
 
Table F-B
86.6 "
2,200 mm
 
Age
2008
2008
 
Ref: #
25705
25705
 
Upsetting tonnage
11,023.1 tons
10,000 tonnes
 
Press Action
Pull Down
Pull Down
 
Number of Columns
Four (4)
Four (4)
 
Distance between column surfaces L-to-R
167.3 "
4,250 mm
 
Distance between column surfaces F-to-B
86.6 "
2,200 mm
 
Rated Total Forging Tons
8,818.5 tons
8,000 tonnes
 
Forging Speed
7.4 "/sec
189 mm/sec
 
Ram Advancing Speed
9.8 "/sec
250 mm/sec
 
Ram Return Speed
9.8 "/sec
250 mm/sec
 
      Convert to Inches Convert to Metric
Note:

Additional Info:

For the Press - Built new 2008
Normal Force: 80/100MN at 335/420 BAR
Return Force: 16MN at 250 BAR
Operating Pressure: 320 BAR
Top Die Stroke: 3,350mm
Daylight: 6500mm
Clear width: 4,250mm
Clear width Cross: 2,200mm
Overall height: 9,000mm
Overall depth: 14,000mm
Approach speed: 250mm/sec
Return speed: 250mm/sec
Forging speeds: 189, 94 & 63mm/sec
Table shift stroke: 2 x 3,000mm
Table shift speed: 0 - 250 mm/sec
Die shift stroke: 5,600mm
Die shift speed: 0 - 250mm/sec
Die magazine stroke: 3 x 2,200mm
Die magazine speed: 0 - 500mm/sec
Forging tolerance: ± 1mm

For the 100 ton Manipulator - Built new 2008
Model #: 1000kN/2500kNm
Carrying capacity: 1000KN (100 tonnes)
Tongs opening range: 200 - 2,800mm
Tong height: 1,800 - 3,300mm
Tilting angle: UP 15º
Horizontal movement: ±300mm
Overall width: 5,700mm
Overall height: 5,900mm
Overall length: 16,500mm
Forging speed: 0 - 30mtrs/min
Travelling speed: 0 - 50 mtrs/min
Turning speed: 0 - 8 rpm
Clamping speed: 70mm/sec
Travel distance: 26,000mm

  • Still installed and under power
 
  • Available for immediate inspection and delivery