New Machinery


Save

Save

Share:

10,000 ton German Pipe Hydra-Cladding/Forming Press
- 1524mm (60") dia x 63.5mm W/T "Like New" Re:25930

25930

This HydraCladding and Forming Press was designed and built by a West German company in 2015 and has only been run lightly for a short time. It is in "Like New" condition.

It will produce Clad Pipes  fromn 406 to 1524mm diameter in wall thicknesses from 10 to 63.5mm and in lengths up to 12,2 meters.

It is currently dismantled and is ready for an immediate inspection and to be shipped without delay.

JCO "U"ing & "O"ing Mills
Specifications
Max OD
60 "
1,524 mm
 
Max W/T
2.5 "
64 mm
 
Mx Lgth
40 feet
12 meters
 
Mill Type
HydraCladding Press only
HydraCladding Press only
 
Pipe Spec
All Clad Pipe
All Clad Pipe
 
Ref #
25930
25930
 
Manufacturer
West German
West German
 
Year built new
2015
2015
 
      Convert to Inches Convert to Metric
Note

Additional info:

Rated pressing tonnage..............10,000.0 tonnes

Return tonnage.................................300.0 tonnes

Pipe diameter range:

max pipe diameter........................1,524.0 mm

min pipe diameter ...........................168.0 mm

Pipe wall thickness range:

max wall thickness..............................63.5 mm

min wall thickness...............................10.0 mm

Pipe Joint Length range:

max length.............................................12.2 meters

min length................................................6.0 meters

Pipe Joint Weight............................20,000.0 kgs

Press Speeds:

High Down.............................................70.0 mm/sec

Middle ...................................................25.0 mm/sec

Pressing.................................................15.0 mm/sec

Return....................................................70.0 mm/sec

Main Cylinder x (6):

cylinder bore......................................870.0 mm

rod diameter .....................................850.0 mm

cushion...............................................none

working pressure .............................294.0 bar

test pressure.....................................368.0 bar

working fluid....................................mineral oil

Lifting Cylinder:

cylinder bore......................................457.0 mm

rod diameter .....................................300.0 mm

stroke ..............................................1,750.0 mm

cushion (rod side)..............................none

cushion (head side) ........................attached

working pressure .............................210.0 bar

max pressure ...................................340.0 bar

Press Dimensions:

press width .....................................4,920.0 mm

bed width .....................................12,790.0 mm

press depth (front to back) at operators level .......3,900.0 mm

press depth (front to back) at top of press .............6,520.0 mm

floor to top of press..................................................12,455.0 mm

depth below floor........................................................4,800.0 mm

Infeed Plate table Dimensions:

length..........................................................................12,200.0 mm

width.............................................................................4,800.0 mm

Main Hydraulic pump motors:

quantity.............................................................................3.0

motor power rating each motor ................................150.0 kW

total main hydraulic pump motor power ..................450.0 kW

Press Weight unpacked (approx) .............................1,155.9 metric tonnes

Complete with:

• Crown Mounted Hydraulic System
• Lubrication system
• Electrical system including all drive motors and electrical cabinets
• Electronic Control System
  • Exceptionally fine condition
 
  • Dismantled and moved to storage