This machine is currently under-going a complete rebuild. It may be inspected at our Cleveland, Ohio facility.
It was originally built by National as an Automatic Tong Feed Machine and can be fully restored as such or taken as a standard machine - Customer's choice.
During the rebuild process the following will be performed:
The following work is being performed to this machine during Rebuilding:
1.) Re-Machine header slide, toggles and grip slide
2.) Install New bronze bushing and pin for the heading slide and pitman
3.) Install New Die Box Liners, Bottom & Side Plates & New Face Plate
4.) Install New Main Crankshaft Bearings
5.) Brake; Rebuild Cylinder, New Brake Lining, Rework Keys, Turnbuckle & Links
6.) Clutch; Machine Main Plate, Re-line Drive Plates, Install New Diaphragm
7.) Toggles; Polish Pins, New Bronze Bushings installed
8.) Fabricate New Guards & Install
9.) Install New lubrication Kit Complete; pump, lines, distributors, etc.
10.) Install Six New “V” Belts
11.) Install New 12” x 5” Sheave
12.) Install New Ross Valve
13.) Install New Flywheel Roller Bearings
14.) Install Complete new Electrical System and Controls
15.) Rebuild 10HP Motor and 5.0 motor Gear Box
16.) Paint Machine and Guards to Customer Spec
17.) Includes 5 days of Cycle Testing, Adjusting and Checking under power
18.) Properly Pack and Load onto carrier of choice
19.) One-Year Warranty included
TrueForge Global Machinery Corp. 100 Merrick Rd ●Suite 208E ●Rockville Centre, New York 11570 USA Phone 516-825-7040 ●Fax 516-825-7115 Email firstname.lastname@example.org