Mech Forging Presses Hyd Forging Presses Screw Presses Forging Hammers Hot Formers
Radial Forging Upsetters Manipulators Ring Rollers Forging Rolls
Hydraulic Presses Transfer Presses Bar & Billet Shears Forging Lines Knuckle Joint Presses
Induction Heaters Furnaces Mech Power Presses Related Equipment Trim Presses

Beche (West Germany) model FBQ 100/2500 a (4") 100mm blank dia x 630mm blank length Vertical Flat Die type Fully Automated Cross Wedge Rolling Line w/Feeder, Shear and Heater, Re:24402

Reference #:

24402

Manufacturer:

Beche

Model:

FBQ 100/2500 a

Rated rolling diameter:

100mm (4")

Max workpiece length:

630mm (24.8")

Normal rolling stroke:

2,500mm (98.4")

Max rolling stroke:

2,700mm (106.3")

Max tangential rolling force:

315kN (31.6 tons)

Max rolling slide speed:

1,200mm/sec (47.2"/sec)

Main drive motors x (2):

160kW (215hp) each

Operating electrics:

440 volts 3 phase 60 Hz

Machine dims:

L-to-R 3.2 mtrs (10.5 ft)
F-to-B 1.4 mtrs (4.6 ft)

Machine net weight:

51 tons (112,200 lbs)
 


Click on image for more pictures

Add To My Quote Cart

View My Quote Cart

Built new in 1993, this Flat Die Cross Wedge Rolling Machine is in Excellent working condition. It is a complete line from Bar Feeding System to finished rolled product.

Note: This line is perfectly suited for producing Steel Balls up to 4" (100mm) diameter and is capable of running off approximately twenty four (24) 4" diameter Balls per minute.

Designed for the Hot Rolling of workpieces up to 100mm in diameter and a max rolled length of 2,500mm, the machine is suitable for producing Preforms, intermediate and finished formed parts.

Note: To view a video of this machine running production follow this link https://youtu.be/bIx4yOMUy5c



Machine Dimensions:
• overall height 7.6 mtrs (24.9 ft)
• height above floor level 4.8 mtrs (15.7 ft)
• depth below floor level 2.8 mtrs (9.2 ft)
• machine width L-to-R 3.2 mtrs 10.5 ft
• machine depth F-to-B 1.4 mtrs (4.6 ft)
• total depth of machine including push-in device 4.1 mtrs (13.4 ft)

Weights:
• total weight of machine including die holder 51,000.0 kgs (112,200.0 lbs)
• slide unit RH (w/guide rod & upper & lower bearing 17,180.0 kgs (37,796.0 lbs)
• slide unit LH 17,100.0 kgs (37,620.0 lbs)
• support roller RH 2,300.0 kgs (5,060.0 lbs)
• support roller LH 2,290.0 kgs (5,038.0 lbs)
• die holder (1 set) 2,150.0 kgs (4,730.0 lbs)
• finished part outfeed 560.0 kgs (1,232.0 lbs)
• push-in device 700.0 kgs (1,540.0 lbs)
• steep elevator 1,300.0 kgs (2,860.0 lbs)
• chain, oblique elevator 1,690.0 kgs (3,718.0 lbs)
• hydraulic power unit (approx) 4,600.0 kgs (10,120.0 lbs)
• accumulator station #1 1,790.0 kgs (3,938.0 lbs)
• accumulator station #2 1,100.0 kgs (2,420.0 lbs)
• piping, drive / machine (approx) 1,000.0 kgs 2,200.0 lbs
• switchgear cabinet 900.0 kgs (1,980.0 lbs)
• control console & control panel 150.0 kgs (330.0 lbs)
• cable & piping (approx) 700.0 kgs (1,540.0 lbs)

Complete with:
• Vertical Flat Die Cross Wedge Rolling Machine model FBQ 100 / 2500a
• FICEP (ITALY) Bar Unscrambling/Feeding system
• Roll Feeding system
• AEG-Elotherm ELOMAT 27/1500/1/N-12P 1,500kW Induction Bar Heating system
• Ficep (Italy) CTCH/PLC 100 Hydraulic Inline Bar/Billet Shearing system
∞ 1.) 100mm diameter blank with up to 550mm blank length capacity
∞ 2.) Hyd counter pressure attachment produces burr-free, cuts even for short cut-off lengths
∞ 3.) Billet positioner at Shear exit
∞ 4.) Rollerway to receive the cold bars
∞ 5.) Rollerway to mount the induction coils
∞ 6.) Bar measuring device
∞ 7.) Bar weighing device
∞ 8.) Bar loading table
∞ 9.) Magazine to discharge bars rejected by the heater
∞ 10.) Programmable Logic Controls (PLC) at different stages of automation
• Supply Conveyor
• Discharge Conveyor
• Control Console for Bar Heater and Bar/Billet Shear
• Control Console for the Cross Wedge Rolling Machine
• Twenty Three (23) Spare Induction Heater Coils
• Two (2) Spare Guides Shafts for the Cross Rolling System
• Eight (8) Spare Die and Die Holder Sets
• Twenty to Thirty (20 to 30) volumes of documentation and drawings

 

 

 

 

 

TrueForge Global Machinery Corp.
100 Merrick Rd Suite 208E Rockville Centre, New York 11570 USA
Phone 516-825-7040 Fax 516-825-7115 Email sales@trueforge.com